additional information

 

 

 
 
PE 500
rotating sealer for polyethylene


Bag sealer model PE 500 can seal polyethylene and polypropylene bags with a continuous movement, without interruption.
The operator must insert the edge of the bag into the side-entry guide plate: the bag is then automatically forwarded, sealed and expelled at the opposite side.  An optional table can help the movement of the heavier bags through the machine.

The seal is mm 3 wide; the sealing temperature can be regulated as needed on the controlling unit and it is kept automatically at the chosen level by a thermo regulator through a feeler.  The speed is fixed at 7,5 m  per minute.

The PE 500 sealer can be used on low and high density polyethylene and cast polypropylene. For best results we suggest to use it on bags not wider than cm 25/30 and weight 500/750 gr max.

  type of seal

  ribbon seal 5 mm wide

  materials

 polyethylene, cast polypropylene - max thickness 50 microns

  speed

  7,5 mt/min

  sealing temperature

  0-200°C (+/-2%)

  dimensions   55x25x15 cm
  weight   15 kg

 voltage

  230 V

  consumption

  390 W/hour max

Cibra reserves the right to modify all models without warning.
Cibra Nova snc - Via Brescia 16 - 20063 Cernusco sul Naviglio (Milano) - Italia
Tel +39 02 92104927 - Fax +39 02 92104752 - cibramail@cibra.it