additional information

 

 

 
 
CIBRINA
instant sealer for low gauge bags
s

CIBRINA_d

Cibrina is a pedal sealer that  seals rapidly and hermetically   polyethylene, PVC and polypropylene bags up to 60 micron and  cm 30 width. The  seal is made of two parallel strips at 10 mm distance from each other.

After a heating of about 5 minutes, sealing bar is constantly hot.
The temperature of the sealing bar is regulated according to the bag’s requirements, and it is kept constantly at the required level by an electronic heat regulator through a feeler connected to the sealing bar.
The seal is made just in the time required to lower and raise the pedal.

Cibrina is suited for constant, heavy duty use.

On request, the sealing bar can be  engraved with your name or date coder (see bottom page).

right - basic version
bottom - vertical version with table

CIBRINA

e40

Vertical version

This sealer is also available with a vertical stand that includes a support table for the bags. The sealing jaws close on the bag's edge from above.

On this stand, both the sealing head and the bag support can be moved up and down according to needs.

  welding width

  30 cm

  type of seal

  2 parallel strips distant 10 mm one from the other

  materials

  polyethylene, polypropylene, PVC max thickness 60 microns

  dimensions

  42x40x105 cm

42x40x160 cm
  weight
14 kg
22 kg

  voltage

  230 V

  consumption

  180 W/hour max


DATE CODER

Sealers model CIBRINA can be fitted on request with a date coder (day-month-year) complete with punches to compose the date for 5 years.

The standard sealing bar on sealers CIBRINA is 10 mm wide with 2 parallel strips at a 10 mm distance from one another:

The sealing bar with date coder (day-month-year) is 10 mm wide and 3 sealing lines. In the middle of the sealing bar there are square holes where punches are placed. The resulting seal looks like this:

Standard coders are supplied with the following punches:

  • 1 group of 2 punches numbered 1 and 2
  • 1 group of 10 punches numbered 0 to 9
  • 1 group of 12 punches for the months (01-...-12)
  • 1 group of 5 punches for the years (last 2 numbers) 
Cibra reserves the right to modify all models without warning.
Cibra Nova snc - Via Brescia 16 - 20063 Cernusco sul Naviglio (Milano) - Italia
Tel +39 02 92104927 - Fax +39 02 92104752 - cibramail@cibra.it